Rebar pull tester set
Our company has developed the digital rebar pull tester. Digital rebar pull tester is used to verify the fixing power and effectiveness of the constructed rebar. When a user applies pressure with a hand pump and pulls out a rebar, the load applied to the rebar can be easily checked with a digital number in ton units.
Small Inclinometer Casing
The outer diameter of this casing is Ф64mm. When the coupling is connected, the outer diameter is Ф70mm, and it can be installed on the NX drill Ф76mm, which is a domestic normal drilling size. The casing of other companies in Korea is manufactured with a diameter of Ф55~60mm, so if a small displacement occurs, the inclinometer probe is caught and frequently cut. Therefore, it is recommended to use a large inclinometer casing as much as possible.
Load cell digital indicator
The digital indicator is directly connected to our FSG load cell and displayed in units of direct load(ton.f), which can be useful for emergency situations or maintenance on site.
Digital hydraulic calibrator set
The digital hydraulic calibrator set is a self-calibrator (model HC-158) for testing or calibrating a vibrating wire piezometer. It combines a hand pump set with a piezometer clamp that is made differently by model. Calibration by using digital pressure gauge and water pressure makes easy and accurate calibration possible,
Rail track monitoring system
The model ACE-RTM Rail track monitoring system can precisely measure any settlement or twist of rails on railroad tracks. It is also useful for measuring horizontal settlement of structures. The ACE-RTM connects the sensors of all points by the sequerrial serial communication type of one-line cabel. It can be remotely measured using our ADL-200A smart logger and wireless modem.
Smart logger
Smart logger ADL-200A is our company's top model static data logger. It is a full range logger that connects 16-channel vibrating wire sensor and 16-channel analog sensors (temperature sensor, mV sensor, FSG sensor, sequential serial communication sensor, etc).
FSG readout unit
FSG is an output device that measures the strain of a sensor made of sensor elements. Full, Half and Quarter bridges of 3500 and 1200 strain gauges can be measured, and the programming ID setting function can be used to measure the conversion factor, zero point, and unit of use by ID to measure the final engineering units required by the user.
Placstic crackmeters
There are three types of plastic crackmeters SC-100:horizontal installation type SC-100A & SC-100B install on the surface, and right angle installation type SC-100C install on the corner. Depend on installation environment and measurement range, select and use.
MEMS readout unit
The model ACE-1500 MEMS readout unit which is a versatile output device can measure MEMS sensor, ELS (Electrolytic Level Sensor), voltage sensor (mV), current sensor (mA), thermistor sensor and platinum resistance temperature sensor (PT-100).
-